Lovely Home Accents

Home Improvement Guest Blog

How to Get Started with the Process of Rendering

Every household has some time or the other has gone through the process of rendering. In simple terms, to render something means to illustrate or paint something in order to make it smoother. Therefore, this process can be taken up in a series of steps in order to keep all buildings protected and externally strong. Rendering plaster or cement helps in covering all defective parts and keeps environmental factors away. Requirements of rendering are certain simple equipment and they are listed below.
rendering-for-modern-house
Rendering for Modern House

What are the common tools required for the process of rendering?

  1. A small shovel that can be used for mixing the raw materials.
  2. A straightening edge in order to look and analyze the angle of the surface rendered.
  3. The cement mixing machine or a wheelbarrow is extremely handy.
  4. Timber is a crucial element here.
  5. Common rendering materials like cement are used.
Once you have all the elements and materials with you, let us look at the step by step process for rendering.

Looking at the basics of the rendering system:

To render a structure might look easy to you but there are a lot of intricate details that need to be taken care of. Therefore, the step by step process is explained as follows:
rendering
Rendering
  • Getting the materials together – Firstly, you must get all the elements together so that they can be taken note of and the quality can be checked. It is a must to pour water onto the surface and keep it ready. Mix in all of the elements and get enough information about the quantity that is required. Too much of one rendering item can destroy the texture and make things worse.
  • Preparing the common surface for rendering – The surface that is to be rendered must be smooth and watered perfectly. Keep it free from all external elements like dust. If the surface is smooth, the cement or the plaster might be absorbed smoothly. Also, coat the surface layer after layer and do not rush into the process. It usually takes 24 hours to absorb the render done earlier.
  • Mixing all of the rendering items – Once the surface is well prepared, it is now time to mix all the items together. Since there are various types of render available, it is essential for you to decide the type that you are looking for. Make sure to mix the material well enough that turns into a paste. Use a wheelbarrow to mix it all together and then start applying it to the surface. A small surface might take half an hour to complete.
  • Apply the coat of render – The render that is applied must not be too thick or too thin. It must be easily absorbed in the wall depending on the thickness. Using the float, allow the render to evenly spread. After it is done, use the straightening edge to see the results. If the line is not straight, make sure to even it out. Lastly, you can also apply a final coat of the rendered material to make it look smooth.
Rendering is an essential part of all building activities. It is best to start the process early in the morning so that it dries out by the end of the day. It is also essential to make the surface moist before you pour in the rendered mix in order to settle it quickly. The bricks might not settle well with the render if it is not moist. Therefore, adhere to the rules of the brickwork before you start the actual rendering workload. It is always good to hire professionals for the rendering of your property.

LEAVE A RESPONSE

Your email address will not be published. Required fields are marked *